Upgraded Magnetic Knife Holder for Professional Use - 17 Inch Stainless Steel Knife Strip

AVOID ANY DRILLING, HOLES AND DAMAGE ON TILE BACKSPLASH

The adhesive installation should work on almost every surface such as granite/ceramic backsplash tile, concrete, glass, plastic, metal, thin drywall and wood.

BEFORE INSTALLATION: WIPE & CLEAN - Thoroughly wipe and clean the intended surface, making sure to remove any dust, fat, oil or any other debris. Wipe down everything and ensure no soap/cleaning material residue is left and let dry completely. MARK THE ACCURATE POSITION - We strongly recommend taking the bar and using a level on top, and then marking a few guides for accurate and straight mounting.

SIMPLE DIY ADHESIVE INSTALLATION: APPLY ADHESIVE TAPE: Use the included adhesive strips (they are all double sided tape). Apply them on the entire backside of the knife bar one by one, with the red side facing up. Apply some pressure on all the tape units to ensure a stronger adhesive bond. To finish, peel the red side off and the bar is ready for placement. APPLY THE BAR: After guide marks on the intended area are in place, carefully place the bar. Do not remove and re-apply the bar as this will damage the adhesive durability. After you finish, apply some pressure on the entire bar a few times against the wall. WAIT 24 HOURS: After 24 hours of waiting, you're good to go! Please be patient and let it sit without any weight or knives. It will be as solid as a rock and will hold any knife (even your heaviest, largest, most expensive knives and kitchen items).

(OPTIONAL) WALL DRILL INSTALLTION: The bar is an all-in-one unit and not a two part product (like other common knife bars). On the backside of the bar, you will find two permanent slots for a drill mounting option. We've included all the hardware needed (screws, screw anchors and carton stencil for accurate hole positioning). Step by step detailed instructions with illustrations are included for both adhesive and drill installation so don't worry :)

GREAT SPACE SAVER AND UPGRADES ANY KITCHEN! Finally, you can get your old, large & bulky knife block off the counter and clear up so much precious counter space. Standard knife blocks collect so much dirt inside of it and there's no good way of cleaning them. Stop guessing which knife you want by pulling the handles one by one. All your most used knives will be fully visible and in reach. Knife blocks are usually sized for a specific set of knives and most of them are not in your daily use.

EMPTY YOUR KITCHEN DRAWERS Frees up space in your kitchen overcrowded drawers. Much easier to find the knives that were hidden in drawers. Keep your knives' edges and blades sharper and prevent them from getting damaged in a drawer. Safer for everyone and prevents accidents from hidden blades.

WHAT'S INSIDE PACKAGE: Beautiful packaging which makes the product a great luxury gift idea for your friends or family. Anyone will be more than happy to get this high end product, especially if they like to cook! KNIFE BAR: Extremely powerful magnetic knife bar with lightweight Neodymium magnets inside. These are the strongest magnets available and are more powerful than other common bars with weaker ferrite magnets that are not ideal for adhesive mounting. Knife bar dimensions are 17" x 1.97" x 0.57" (43.2cm x 5cm x 1.5cm). INDUSTRIAL ADHESIVE STRIPS: Unlike other product on the market, we've added the strongest adhesive strips available. We have pre-cut them into a few pieces to match the entire length of the bar. After testing, we found multiple strips to be stronger than one long adhesive strip. DRILL MOUNTING (OPTIONAL) HARDWARE: We've included quality screws and screw anchors for optional drill installation (bar has two slots on the backside for standard wall mounting). You will also find a very helpful carton stencil guide for accurate positioning of the bar and holes before drilling. USER INSTALLATION GUIDE: Step-by-step detailed instructions and illustrations both for adhesive and drill installation.

BY FAR THE HIGHEST QUALITY ADHESIVE KNIFE BAR ON THE MARKET DESIGNED SPECIFICALLY FOR ADHESIVE USE - We are the only company that developed a product that is specifically designed for adhesive mounting. It took us around two years of trial and error and many tests to find the best materials and knife design for these specific needs. STRONG AND LIGHTWEIGHT INTERNAL MAGNETS - The bar is an all-in-one unit which is fully loaded with Neodymium magnets inside (also known as "Rare Earth" magnets). Neodymium magnets are the ideal magnets to use because they are lightweight and strong, which is the best solution for adhesive bars. You will be amazed at how well your heaviest knives will be secured! INDUSTRIAL STRENGTH ADHESIVE - Unlike other bars that use a common consumer adhesive strip, we've tested and added the strongest double sided adhesive strips available in the industry. In addition, the strips are pre-cut into a few pieces that match the entire length of the bar. We found this method to be a much stronger and safer way to adhere the bar to the wall directly using tape (while other bars use one long strip). There is no need to worry that the bar will fall off and possibly cause unwanted damage. HIGHEST QUALITY STAINLESS STEEL (TYPE 304) - Our stainless steel is type 304, while most brands use type 201. The major difference is the corrosion resistance – type 304 has a higher corrosion resistance which means that under normal environmental conditions, it has a lifetime durability. In comparison, type 201's appearance can be affected within two to three years.

CHOOSE THE DESIGN THAT WORK BEST FOR YOUR NEEDS We have a few versions of knife holders (for wall drill only, for fridge mount and adhesive), each available in three different sizes. Below you have our medium size bars. For additional sizes and needs, please check our entire collection on our store page at Amazon.com/hmmagnets.

SUPER STRONG MAGNETS This bar is fully packed with expensive Neodymium "Rare Earth" magnets, which makes it extremely powerful. It will hold any set of knives firmly without slipping or shifting - not even a hint of a wobble! It's a safe storage for expensive Chef's knives, Butcher knives, Cleavers, Bread knives, Carving knives and ANY other Kitchen knife - from the largest, heaviest knife to the smallest and skinniest one.

VERY LIGHTWEIGHT BAR Using Neodymium "Rare Earth" magnets make this bar the most powerful yet lightweight bar you will find on the market which is the ideal solution for adhesive knife strips. Other common bars use a weaker type of magnet which is heavier and not ideal for adhesive installation.

INDUSTRIAL STRENGTH ADHESIVE TAPE Instead of using a common and domestic adhesive tape, we've tested and added the strongest adhesive double sided industrial tape. There is no need to worry that the bar will fall off and possibly cause unwanted damage. In addition, the strips are pre-cut into a few pieces that match the entire length of the bar. We found this method to be a much stronger and safer way to adhere the bar to the wall directly using tape (while other bars use one long strip).

HIGH END STAILESS STEEL (304) Our stainless steel is type 304, while most brands use type 201. The major difference is the corrosion resistance. Type 304 has a higher corrosion resistance which means that under normal environmental conditions, it has a lifetime durability. In comparison, type 201's appearance can be affected within two to three years.

EASIER TO CLEAN High quality Stainless steel that is super easy to wipe and clean. Unlike standard wooden knife blocks that collect dirt inside with no good way of cleaning them, you can easily wipe the entire bar off and let it dry in minutes.

DRILL OPTION & HARDWARE The bar has two keyhole slots on the backside for optional standard wall mounting. You simply attach two screws to the wall and the magnet slips over the screws with the slots on the back (just like hanging a picture on the wall, except the mount is secure so the bar never moves once it's on). Along with quality screws and screws anchors, we've also included a very helpful carton stencil guide for accurate positioning of the bar and holes before drilling.

GREAT FOR RV AND RENTALS As a tenant, you usually can't drill holes in the walls, so this is a perfect solution to enjoy a quality knife holder without drilling or damaging the backsplash tiles. In addition, it's also a great option for people with a boat, mobile wheel camper or RV. Our super strong and lightweight adhesive bar will hold everything completely still!

NOTES & FRIDGE INSTALLATION Pacemakers may be affected. Keep a distance of at least 6 inches from the magnet bar. The bar should be installed horizontally and the knives should be placed vertically. *Fridge mounting - Do note this bar is NOT magnetized on the back; we have specially created a double-sided magnetic knife holder with magnets on both sides. It can be attached to the side of your fridge directly without any use of adhesive tape. Please visit our store at Amazom.com/hmmagnets for more details.

From the brand HMmagnets High Quality Magnetic Products for Home & Office

product information: